Universal Laser Systems Laser Platform M-300 Průvodce řešením problémů stáhnout pdf (Strana 71)

7-10 Sample Materials

CORIAN / AVONITE / FOUNTAINHEAD

RASTER ENGRAVING

LASER WATTAGE POWER SPEED PPI PASS DEPTH

15 100 20 500 1 .005”

20 100 27 500 1 .005”

25 100 33 500 1 .005”

30 100 40 500 1 .005”

DEEP RASTER ENGRAVING

LASER WATTAGE POWER SPEED PPI PASS DEPTH

15 100 10 1000 1 .015”

20 100 13 1000 1 .015”

25 100 17 1000 1 .015”

30 100 20 1000 1 .015”

VECTOR ENGRAVING

LASER WATTAGE POWER SPEED PPI PASS DEPTH

15 100 4.0 1000 1 .010”

20 75 4.0 1000 1 .010”

25 60 4.0 1000 1 .010”

30 50 4.0 1000 1 .010”

COMMENTS

If paint filling, mask the material first, then engrave through the masking. In this way, when

ready to paint fill, the material is already masked. Spray painting seems to be the easiest. Use

the paint sparingly. Excess paint can accumulate on the edges of the engraving, which will

make mask removal difficult and leave unsightly ridges. It is best to apply several lighter coats

than one heavy coat of paint. Remove the masking after the paint has dried.

WARNING: ENGRAVING THIS MATERIAL PRODUCES ABRASIVE

PARTICLES. Clean the laser system more frequently to reduce wear and

tear on the motion system components and optics. Damage to the laser

system from inadequate or insufficient maintenance WILL NOT be

covered under warranty.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 99 100

Žádné komentáře

Universal Laser Systems Laser Platform M-300 Průvodce řešením problémů Strana 71